I'd like to configure Quagga as a non-routing route reflector. It seems there is no equivalent of the "no-install" directive available in Juniper (https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/no-instal...)
Currently, I am using this kind of configuration:
auto swp1.90 iface swp1.90 vrf public address 198.51.100.226/25 up sysctl -qw net/ipv4/conf/$IFACE/forwarding=0and:
router bgp 65000 vrf public bgp router-id 198.51.100.226 bgp cluster-id 198.51.100.226 no bgp default ipv4-unicast ! neighbor public-v4 peer-group neighbor public-v4 remote-as internal neighbor public-v4 ttl-security hops 1 neighbor public-v4 bfd bgp listen range 198.51.100.128/25 peer-group public-v4 ! address-family ipv4 unicast neighbor public-v4 activate neighbor public-v4 route-reflector-client neighbor public-v4 addpath-tx-all-paths exit-address-family
And I make bgpd runs with "--no_kernel". Is there a better way? Routes in the kernel don't bother me, but I would like to avoid clutter the hardware with them.