Urgent question for "netshow int all" command.


I used the image for the VMware CumulusVX 3.0.1 on VMware 12.1.0 based Windows10.
When I input the "netshow int all" command to test the environment setting for VRRP and MLAG, there are no output for the IP and virtual IP of br_10 interface.
But if I input "netshow interface br_10" command, It works well.

So I wondering this situation is error or intended.
If you want more setting imformation, I will attach the screenshots.




7 replies

Userlevel 5
Hey,

Looks like it could be a bug. We are investigating and will let you know more soon.

Thanks,

Scott
Userlevel 5
Can you copy/paste your /etc/network/interfaces file here? This may have been fixed already in a new build.
Scott Suehle wrote:

Can you copy/paste your /etc/network/interfaces file here? This may have been fixed already in a ...

my /etc/network/interface as follows

# This file describes the network interfaces available on your system# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*.intf

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.0.108/24

auto swp1
iface swp1

auto swp2
iface swp2

auto swp3
iface swp3

auto swp4
iface swp4

auto swp5
iface swp5
address 192.168.100.102/24

auto swp6
iface swp6

auto peerlink
iface peerlink
bond-slaves swp1 swp2
mstpctl-portautoedge no
up atropos --increase
down atropos --reduce

auto downlink1
iface downlink1
bond-slaves swp3 swp4
mstpctl-portautoedge no
clag-id 1
up atropos --increase
down atropos --reduce

auto peerlink.10
iface peerlink.10

auto downlink1.10
iface downlink1.10

auto peerlink.4094
iface peerlink.4094
address 192.168.111.1
netmask 255.255.255.0
clagd-priority 4096
clagd-peer-ip 192.168.111.2
clagd-backup-ip 192.168.0.109
clagd-sys-mac 44:38:39:ff:00:01

auto br_10
iface br_10
address 192.168.10.250/24
bridge-ports peerlink.10 downlink1.10
bridge-stp on
post-up vrrpd -ni $IFACE -v 1 -p 110 -z 90 -x 110 192.168.10.254
pre-down kill $(cat /var/run/vrrpd_$IFACE_*.pid)
Userlevel 5
Scott Suehle wrote:

Can you copy/paste your /etc/network/interfaces file here? This may have been fixed already in a ...

Great, can you also post the output of "ip addr show"
Scott Suehle wrote:

Can you copy/paste your /etc/network/interfaces file here? This may have been fixed already in a ...

repeat thanks "ip addr show" The contents of the long sumury br_10
14: br_10: mtu 1500 qdisc noqueue state UP group default link/ether 00:0c:29:9c:79:98 brd ff:ff:ff:ff:ff:ff
inet 192.168.10.250/24 scope global br_10
valid_lft forever preferred_lft forever
inet 192.168.10.254/32 brd 192.168.10.254 scope global br_10
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe9c:7998/64 scope link
valid_lft forever preferred_lft forever

Hello Reiya,
I am able to reproduce this, netshow is getting confused by the underscore in the interface name. In my setup I renamed br_10 to br10, did an "ifreload -a" and now I am able to see it in the netshow output.

We will get this fixed in netshow but in the meantime hopefully renaming the interface is a viable work-around.

cheers
Daniel

Daniel Walton wrote:

Hello Reiya,
I am able to reproduce this, netshow is getting confused by the underscore in the in...

Thanks Daniel,
br_10 -> br10 edit
"netshow int all" i see br10 info

Reply